- #SD CARD SHOWS UP AS MULTIPLE DRIVES HOW TO#
- #SD CARD SHOWS UP AS MULTIPLE DRIVES MAC OS#
- #SD CARD SHOWS UP AS MULTIPLE DRIVES SERIAL#
- #SD CARD SHOWS UP AS MULTIPLE DRIVES PC#
- #SD CARD SHOWS UP AS MULTIPLE DRIVES WINDOWS#
If you still get this message, then there really is not much else you can do other than format it.
![sd card shows up as multiple drives sd card shows up as multiple drives](https://cdn.thewirecutter.com/wp-content/uploads/2020/05/SDcards-lowres-2x1-0249.jpg)
In our case, you should follow the step-by-step instructions for recovering and repairing partitions. It’s a command line tool and therefore a little more technical, but it does work very well. If that doesn’t work, you can try out a third-party tool called TestDisk, which is open source and free. You can try to repair the USB drive by running chkdsk, which I mentioned in Method 4. If the USB drive is giving you the same message on any computer you connect it to, then it’s probably an issue with the file system structure on the USB drive. It’s worth a shot and could be a simple fix. I’ve never really had this problem before, but it seems to cause issues with some folks.
#SD CARD SHOWS UP AS MULTIPLE DRIVES WINDOWS#
Somehow when a device gets connected to a particular port, Windows remembers something about that device and connecting it to a different port can confuse Windows. Apparently this is more of a problem with Windows XP. One solution a few people mentioned was trying to plug the device into a different USB port. Method 4 – Plug into Different USB PortĪt this point, you are running out of options. See what happens when you connect it again. Once it has finished, go ahead and disconnect the drive and then restart your computer.
![sd card shows up as multiple drives sd card shows up as multiple drives](https://www.electronics-lab.com/wp-content/uploads/2020/07/neutrino.jpeg)
r will find the bad sectors and recover any data from there. p will check the hard drive even if it has been marked as dirty. Then type in the following command without the brackets: chkdsk |
#SD CARD SHOWS UP AS MULTIPLE DRIVES HOW TO#
Again, you need to run it using an elevated command prompt, which I mentioned how to do above. Now you might be saying that the USB drive works perfectly fine on a different computer, so it can’t have any possible problem, right? Well, maybe not.Įither way, it’s a solution that some people have said has fixed the problem. chkdsk will check for bad sectors and fix them if they exist. So it may not seem worth doing, but running a chkdsk on your USB drive might also fix the problem. After you have uninstalled all items, go ahead and restart your computer and it will automatically reinstall each USB port.
#SD CARD SHOWS UP AS MULTIPLE DRIVES SERIAL#
Go ahead and right-click on each item under Universal Serial Bus controllers and choose Uninstall. If you are not using Windows 7, you can go to Device Manager by going to the Control Panel, then System and clicking on Hardware. You can do this by clicking on the Start button and then typing in devmgmt.msc in the search box and pressing Enter. Method 2 – Reinstall USB ControllerĪnother thing you can try is to reinstall the USB controllers on your Windows machine. If you are still being asked to format it, keep reading. Now go ahead and restart your computer and then try to plug in your USB device and see what happens. Hopefully, you won’t have to do that though. If, for whatever reason, system file checker cannot replace all corrupt files (which it will tell you), then you will have to manually do it. Get ready to sit back and wait a while because this process usually takes a long time.
![sd card shows up as multiple drives sd card shows up as multiple drives](https://support.content.office.net/en-us/media/cda3c3f0-218e-61d2-1eaa-504a30f19c81.png)
Wi-Fi should be enable in order to activate USB tethering.Now type sfc/scannow and press Enter. When antivirus was enabled several times the problem with "Location" apps were found, but eventually sync was done. The steps described previously, were performed with antivirus disabled. The problem with "Location" apps it is maybe just happeing with my mobile. Click on "USB tethering" and you will have the possibility to select how you want to synchronize you mobile with the PC, for instance, charge only, disk drive, HTC sync, USB tethering, Internet pass-through. Go to the main screen and on top of the screen and drop down the USB symbol or in the same main screen you can click on "menu" and select "Notifications"Ĥ. When I click my "Location" app is opened automatically (I close it).ģ.
![sd card shows up as multiple drives sd card shows up as multiple drives](https://www.easeus.com/images/en/data-recovery/drw-pro/change-drive-letter-and-paths.png)
Click on "USB tethering" to be turn on and a USB symbol will appear in the main screen.
#SD CARD SHOWS UP AS MULTIPLE DRIVES MAC OS#
Click on "USB tethering setting" and select you system (windows or Mac OS X)Ģ.2. Go to settings and select "wireless and network" and do the followingĢ.1.
#SD CARD SHOWS UP AS MULTIPLE DRIVES PC#
When I am connecting the mobile to the PC the "Location" app is opened automatically (I close it).Ģ. Solution for problem with connection between HTC and Windows Vistaġ.